GC2/24" Hose with Male end of the GCS and standard 2nd stage end to fit the ADV
Consists of a 24" AP300 regulator hose with the male half of the GCS (connects with the female snap connector of GC1/24) on one end and a standard (9/16" UNF female) 2nd stage connector end on the other. This can be connected to the rebreather ADV
Alternatively, the GC3 FLOWSTOP can be connected in-line between the GC2/24 and the ADV
The male connector end of the GC2/24 features an automatic closure valve that prevents water entering the hose when disconnected
N.B. The male end will connect to the female connection of any AP150 (Auto Air) hose
N.B. All hoses can be shortened by unscrewing the reusable end fitting and cutting the hose to the required length. The end can then be screwed back on. The crimped 9/16" UNF end is not reusable
Longer hoses are available on request
IMPORTANT NOTE: The APD Gas Connector System (GCS) conforms to the EN250 regulator breathing standard down to 40m. Below this depth the breathing performance falls below this standard. If the GC3 FLOWSTOP is used in-line with the GCS the system conforms to EN250 down to 30m.